Maximum ¹

150 m / 250 m

25 m

to reflector

1,500 m

Not Applicable

Minimum

0.2 m

0.4 m

Accuracy 

Absolute ²

CP: Within 2 cm /
DV: Within 4 cm

CP: Within 2 cm / DV: Within 4 cm

Operation ³

CP: Within 5 mm /
DV: Within 25 mm

CP: Within 5 mm / DV: Within 25 mm

Repeatibility ⁴

CP: Within 3 mm /
DV: Within 4 mm

CP: Within 3mm / DV: Within 4 mm

Resolution

1 mm

1 mm

Laser

Infra Red(IR)
Wavelength

905 nm

905 nm

Visible  Pointer
Wavelength

635 nm

650 nm

Eyesafety (IR)

Class 1 (US
FDA 21 CFR1040)

Class 1(US
FDA 21 CFR1040)
Class 1M (IEC 60825)

Beam Divergence

5 mrad (0.28^o)

4 mrad (0.23^o)

Environmental

Operating
Temperature

-10^oC to 50^oC;
Options: 150^oC, -40^oC

-10^oC to 50^oC;
Options: 150^oC, -40^oC

Storage
Temperature

-40^oC to 70^oC

-40^oC to 70^oC

Power

Input

24 VDC, 120 VAC

24 VDC, 120 VAC,
2 20 VAC

Consumption

36 W max @ 24 VDC

10 W max @ 24 VDC

Output

Maximum Update

20 readings/sec

5 readings/sec

Minimum Update

1 reading/5 sec

1 reading/60 sec

Digital

RS232C, RS 422

RS232C, HART⁶

Analog⁵

4-20 mA, max load
1,000 ohms;
1,000 VDC isolation

4-20 mA, max load
1,500 ohms;
1,500 VDC isolation

Relays

NO

Programmable for
range (set/reset), alarms

Enclosure

Protection

NEMA4 IP67

NEMA 4 IP65

Explosion Proof

NO

YES

Approvals

FM, CE, CSA

FM, CE, CSA, ATEX⁶

Hazardous Area Classifications

Class I Div 2
Grp A, B, C, D
Class II Div 1
Grp E, F, G ,Class III
Class I Div 1
Grp A, B, C, D (with purgekit)

Class I, Div 1,
Groups B, C and D
Class I, Div 2,
Groups A, B, C and D
Class II, Div 1 and 2,
Groups E, F and G
Class III, Div 1 and 2
Zone 1 and 2 ,
Groups IIA, IIB and IIC
EExd IIB and Hydrogen

Physical

Dimensions

280 L x 205W x 155 D (mm)

127 W x 305 L (mm)

Weight

7 kg

6.2 kg

[1] Maximum ranges are typical and depend on target reflectance, environmental conditions (e.g. dust), and background radiation. Consult factory for details.

[2] At a measurement rate of 1/sec, the specified accuracy is absolute over full temperature range, a variety of materials, and any distance, with 1 standard deviation.

[3] At a measurement rate of 1/sec, this accuracy depends on limited variations in temperature, target, and range associated with the inst allation.

[4] At a measurement rate of 1/sec, under steady state conditions, within 1 standard deviation.

[5] Analog accuracy is equal to absolute or operating accuracy ±0.1% of range.

[6] Pending